产品详细资料

LM270WF-SSE2 is a color active matrix liquid crystal display with a Light Emitting Diode(LED) backlight
assembly without LED driver.
The matrix employs a-Si thin film transistor as the active element.

It is a transmissive type display operating in the normally black mode.

It has a 27 inch diagonally measured active display area with FHD resolution(1920 horizontal by 1080 vertical pixel array).

Each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes.

Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus,presenting a palette of more than 16.78 Million colors with A-FRC (Advanced Frame Rate Control).

It has been designed to apply 8-bit 2port LVDS interface.

It is intended to support displays where high brightness, super wide viewing angle, high color saturation, and high color are important.

Active Screen Size :        27 inches(68.6 cm)(Aspect ratio 16:9)
Outline Dimension :      607.1(H) x 354.1(V) x 12.0 mm (Typ.)
Pixel Pitch:                     0.3114(H)mm x 0.3114(V)mm
Pixel Format :               1920(H) x 1080(V) Pixels. RGB stripes arrangement
Color Depth :               16.78 Million colors, 8 Bit(6 Bit + A-FRC)
Luminance, White :      300 cd/m2(Center 1Point, Typ.)
Viewing Angle:            (CR>10) R/L 178° (Typ.), U/D 178° (Typ.)
Power Consumption :   Total 14.15 Watt (Typ.)(2.35 Watt@ Mosaic_VLCD, 11.8 Watt@ Is = 60 mA)
Weight :                        3,080g (Typ.)
Display Operating Mode:   Transmissive mode, Normally black
Panel type :                   Reverse type
Surface Treatment :       Anti-Glare treatment of the front polarizer(Haze25%, 3H)

It’s typical vertical frame rate (Fv) is 60Hz. For more latest product detail of LM270WF7-SSE2 We strongly recommend that you should refer to datasheet listed on szguangzhuo.com or contact with LG Display or it’s distributor.